Edimax-technology EW-7722PnD Uživatelský manuál

EW-7722PnD User Manual 04-2012 / v1.0

If you lose the CD ROM or you prefer the traditional setup procedure, please follow the instruction as following step. 1. Execute ‘Setup.exe’ progra

3. You can choose the configuration tool used to configure the wireless network card here. It’s recommended to select ‘Edimax Configuration Tool’, wh

5. Please wait while the install procedure is running. When you see this message, please click ‘Finish’ to complete the driver installation process.

8. Please note that if you stopped config utility by ‘Exit’ function, you’ll not be able to maintain the wireless link to the access point you wish t

2-2 Connect to Wireless Access Point After the driver is correctly installed, it will try to connect to any unencrypted wireless access point automat

2-2-1 Using Edimax Utility Please follow the following instructions to use Ralink configuration utility to connect to wireless access point. 1. L

There are 6 fields in ‘Site Survey’ list: Field# Description 1 (SSID) The Service-Set IDentifier of network device (The name of network device) 2

5 (Security) Security mode. When nothing is displayed here, means this network device does not require security and anyone can connect to it. 6

6. Please input encryption key (or passphrase, depends on encryption method) here, then click right arrow. 7. Network card will attempt to co

Windows will prompt you for establish connection also:

Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a

2-3 Connection Profile Management For connections you’ll frequently use, you can save them as a profile and you can recall all settings (security typ

2. Please name the profile in ‘Profile Name’ field, and select the AP you wish to connect in ‘SSID’ dropdown list, then click right arrow . If yo

3. Select this AP’s authentication and encryption method from dropdown list, then click right arrow . 4. Input passphrase key here (or WEP key,

You can repeat step 2 to 6 to setup more profiles of wireless connection. When you wish to connect to a certain wireless access point, click ‘Active

2-3-2 Remove an existing profile When you no longer need an existing profile, just select it from the list and click ‘Delete’ button. If the pr

2-3-3 Edit an existing profile If you have added a profile before, and you wish to change the content of the profile, you can use this function. Plea

2-3-4 Import / Export profile If you need to move your wireless settings to another computer, or you just want to make a backup, you can use import /

To recall previously-saved profiles, click ‘Import’ : Select a profile (file with .prof extension), and click ‘Open’ Please note that this will

2-3-5 WPS Profile Setup WPS (Wi-Fi Protected Setup) is a new, convenient way to setup secured wireless connections. You only need to push a button or

You’ll be prompted to select WPS method and WPS AP: To use PIN (8-digit or 4-digit random number) to setup WPS, select ‘PIN / numeric code’, and

C A T A L O G Chapter I: Product Information ... 4 1-1 Introducti

2-3-5-1 PBC mode WPS configuration When you want to use ‘PBC’ mode: Click ‘Start PBC’ button: Now, please push the WPS button on the access poi

2-3-5-2 PIN mode WPS configuration There are two roles in PIN mode WPS configuration: registrar and enrollee. Registrar is the one who waits for inco

Click ‘StartPIN’ to begin WPS connection, please be patient. You’ll be prompted when WPS connection is established successfully; if you received an

2-4 View Link Status You can check the status of active wireless connection by clicking ‘Link Information’ button: A new window will appear:

b. Throughput Displays the throughput of active connection. c. Statistics Displays the statistics of active connection. Select ‘Transmit’

2-5 Advanced Settings Click ‘Advanced’ button to show advanced configuration menu. In this menu, you can configure some advanced wireless settings

CHAPTER III: Soft-AP Function Excepting become a wireless client of other wireless access points, this wireless card can act as a wireless service pr

To launch AP manager, right-click configuration utility’s icon, and select ‘Launch Config Utilities’. The soft-AP configuration utility will appear

Input SSID in ‘SSID’ field. If you wish to hide SSID so only clients who know your actual SSID can get connected, check ‘Hide SSID’ box. You can al

Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing this high-speed wireless dual band network card! Thi

When you finish, click right arrow . In this page, you have to select the authentication and encryption method of this software AP. Available

In this page, you can configure WEP / WPA passphrase (password). For WEP: Select default Tx Key (normally you can just use Key 1), Key Format

Input WPA-PSK / WPA2-PSK key here. If you wish to change group rekey time interval, you can change it, but normally you don’t need to change it and

No forwarding among wireless clients: Check this box and every wireless clients will not be able to communicate with each other. Beacon Interval

Access control list will appear: First you have to select access control policy: Disable: No access controlling Allow All: Only allow clients i

3-5 Associate List You can see the list of all wireless clients that connected to this software AP. Click ‘Connected Devices’ button to show the list

3-6 About Click this button to see the version information of software AP configuration utility.

CHAPTER IV: Appendix 4-1 Hardware Specification  Standards: IEEE 802.11a/b/g/n  Interface: PCI Express  Frequency Band: 2.4000 ~ 2.4835GHz

4-2 Troubleshooting If you encounter any problem when you’re using this wireless network card, don’t panic! Before you call your dealer of purchase f

point ‘SSID’ field in ‘Site Survey’ function), you have to input correct SSID of the access point you wish to connect. Please contact the owner of acc

1-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This wireless n

4-3 Glossary 1. What is the IEEE 802.11g standard? 802.11g is the new IEEE standard for high-speed wireless LAN communications that provides for up

5. What is Infrastructure? An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable

generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip is, the gr

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital devic

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled

1-3 System Requirements  One CD-ROM drive  Hard Disk : At least 100MB available space  One available PCI Express slot  Operation System : Win

1-5 Familiar with your new wireless network card 1. Antenna 2. WPS Button 3. Link and Tx/Rx LED Definitions LED Name Light Status Description

CHAPTER II: Driver Installation and Configuration 2-1 Network Card Installation 1. SWITCH THE COMPUTER OFF, remove the cover and insert the wir

3. Software Installation, This wizard can be run in Windows XP/Vista/7. The following procedures are operated in Windows XP. You can install the Wire