Edimax-technology HP-2003AV Uživatelský manuál

HP-2003AV HP-2003AC User Manual 02-2012 / v1.0

9

10 Step 5 When the “Edimax PowerLine Utility” setup wizard appears, click “Next” to continue.

11 Step 6 Select where you want to install the utility software, and then click “Next”.

12 Step 7 After the installation is complete, click “Close”. Step 8 An icon will appear on your desktop. Click the icon to open the utility softw

13 Chapter 4: Using the Utility Software 4.1 Main Tab The “Main” tab provides a list of powerline adapters connected to the network. The upper panel

14 4.2 Privacy Tab In the “Privacy” tab, you can create a private network by changing the default network name and configuring its security settings.

15 4.3 Diagnostics Tab The “Diagnostics” tab displays the system information and history of all remote devices. The upper panel displays technical

16 4.4 About Tab The “About” tab contains some basic information about the software. You can also enable or disable the autoscan function under “Pr

17 Chapter 5: Group Button This section demonstrates how to add or remove devices from a HomePlug AV network with the “Group” button. 5.1 Forming a

18 5.2 Joining a Network If you want to add a new powerline device to an existing network, follow the following procedures: Step 1 Press the “Group

1 COPYRIGHT Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

19 5.3 Leaving a Network & Joining another Network If you want to remove a powerline device from an existing network and add it to another networ

20 Chapter 6: Troubleshooting If your powerline adapters have difficulty communicating with each other, try the following procedures:  Try power c

21 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital d

22 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive

23

2 Contents Chapter 1: Introduction ...

3 Chapter 1: Introduction 1.1 Product Features  Complies with 200Mbps HomePlug AV and IEEE 802.3/802.3u standards  Integrated power socket with

4 1.3 Compatibility 200Mbps powerline devices (HomePlug AV standard) are incompatible and cannot be used with 14Mbps and 85Mbps powerline devices (

5 Chapter 2: Interfaces 2.1 Ethernet Port You can connect the powerline adapter to a router, a computer, or any network device via this

6 2.3 LEDs LED Status Description PWR Green Powered on Off Powered off PLC Green Excellent signal with optimal network speed (100Mbps and a

7 Chapter 3: Utility Software Installation Step 1 Before installing the utility software, make sure that no other powerline utility is installed on

8 Step 4 If you have not installed WinPcap version 4.1.2 (or higher) on your computer before, please click “OK” to install the utility. The wizard wi