Edimax Technology AC-M1000 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Edimax Technology AC-M1000. Edimax Technology AC-M1000 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - User’s Manual

AC-M3000 / AC-M1000 Network Access Controller User’s Manual Version 1.00

Strany 2

Edimax AC-M3000/AC-M1000 User’s Manual 83. Base Installation 3.1 Hardware Installation 3.1.1 System Requirements y Standard 10/100BaseT network cabl

Strany 3 - Table of Contents

Edimax AC-M3000/AC-M1000 User’s Manual 98 4.3.6 AP Upgrade Check the APs which need to be upgraded and select the upgrade version of firmware, and

Strany 4

Edimax AC-M3000/AC-M1000 User’s Manual 994.4 Network Configuration This section includes the following functions: Network Address Translation, Privil

Strany 5 - 1. Before You Start

Edimax AC-M3000/AC-M1000 User’s Manual 100WAN side network can access the private machine by accessing the external IP. Choose to enable Automatic WA

Strany 6

Edimax AC-M3000/AC-M1000 User’s Manual 101 y Port and IP Redirect In this function, the administrator can set up to 40 sets of the IP address ports

Strany 7 - 2.3 Specification

Edimax AC-M3000/AC-M1000 User’s Manual 102 4.4.2 Privilege List Edimax AC-M3000 provides two privilege lists, Privilege IP Address List and Privile

Strany 8

Edimax AC-M3000/AC-M1000 User’s Manual 103 Warning: Permitting specific IP addresses to have network access rights without going through standard au

Strany 9

Edimax AC-M3000/AC-M1000 User’s Manual 104effective immediately. When the monitored devices have built-in Web servers and connect to the LAN interf

Strany 10 - 3. Base Installation

Edimax AC-M3000/AC-M1000 User’s Manual 105 Caution: To use the domain name, the Edimax AC-M3000 has to connect to DNS server first or this function

Strany 11

Edimax AC-M3000/AC-M1000 User’s Manual 106 y External Proxy Server: Under the Edimax AC-M3000 security management, the system will match the proxy

Strany 12 - 3.1.4 Installation Steps

Edimax AC-M3000/AC-M1000 User’s Manual 1074.4.6 Dynamic DNS Edimax AC-M3000 provides a convenient DNS function to translate a domain name to the corr

Strany 13 - 3.2 Software Configuration

Edimax AC-M3000/AC-M1000 User’s Manual 93.1.3 Panel Function Descriptions Front Panel y LED: There are four kinds of LED, Power, Status, WAN and L

Strany 14

Edimax AC-M3000/AC-M1000 User’s Manual 108POPS. VPN creates a private encrypted tunnel from the end user's computer, through the local wireless

Strany 15

Edimax AC-M3000/AC-M1000 User’s Manual 1094.5 Utilities This section provides four utilities to customize and maintain the system including Change Pa

Strany 16

Edimax AC-M3000/AC-M1000 User’s Manual 110 Caution: If the administrator’s password is lost, the administrator’s password still can be changed throu

Strany 17

Edimax AC-M3000/AC-M1000 User’s Manual 111 y Backup current system settings: Click Backup to create a .db database backup file and save it on disk

Strany 18

Edimax AC-M3000/AC-M1000 User’s Manual 112 Warning: 1. Firmware upgrade may cause the loss of some of the data. Please refer to the release notes fo

Strany 19

Edimax AC-M3000/AC-M1000 User’s Manual 1134.6 Status This section includes System Status, Interface Status, Current Users, Traffic History, and Notif

Strany 20

Edimax AC-M3000/AC-M1000 User’s Manual 114 The description of the table is as follows: Item Description Current Firmware Version The present firmwa

Strany 21

Edimax AC-M3000/AC-M1000 User’s Manual 115Home Page The page to which the users are directed after initial login success. Syslog server-Traffic Histo

Strany 22

Edimax AC-M3000/AC-M1000 User’s Manual 116 The description of the table is as follows. Item Description MAC Address The MAC address of the WAN1 por

Strany 23

Edimax AC-M3000/AC-M1000 User’s Manual 117MAC Address The MAC address of the WAN2 port. IP Address The IP address of the WAN2 port. WAN2 Subnet Mask

Strany 24 - 4.1 System Configuration

Edimax AC-M3000/AC-M1000 User’s Manual 103.1.4 Installation Steps Please follow the following steps to install Edimax AC-M3000: 1. Connect the 12V

Strany 25 - 4.1.2 System Information

Edimax AC-M3000/AC-M1000 User’s Manual 118 4.6.4 Traffic History This function is used to check the history of Edimax AC-M3000. The history of each

Strany 26

Edimax AC-M3000/AC-M1000 User’s Manual 119 y On-demand User Log As shown in the following figure, each line is a on-demand user log record consist

Strany 27

Edimax AC-M3000/AC-M1000 User’s Manual 120 y Send To: The e-mail address of the person whom the history email is for. This will be the receiver’s e

Strany 28

Edimax AC-M3000/AC-M1000 User’s Manual 1214.7 Help On the screen, the Help button is on the upper right corner. Click Help to the Online Help windo

Strany 29

Edimax AC-M3000/AC-M1000 User’s Manual 1225. Appendix A – Console Interface Via this port to enter the console interface for the administrator to han

Strany 30 - 4.1.4 WAN2 & Failover

Edimax AC-M3000/AC-M1000 User’s Manual 123 y Utilities for network debugging The console interface provides several utilities to assist the Adminis

Strany 31

Edimax AC-M3000/AC-M1000 User’s Manual 124system also supports the SSH online connection for the setup. When using a null modem to connect to the sys

Strany 32

Edimax AC-M3000/AC-M1000 User’s Manual 1256. Appendix B – Network Configuration on PC After Edimax AC-M3000 is installed, the following configuration

Strany 33

Edimax AC-M3000/AC-M1000 User’s Manual 126 3. Click Next when Welcome to the New Connection Wizard screen appears. 4. Choose “Connect to th

Strany 34

Edimax AC-M3000/AC-M1000 User’s Manual 127 6. Choose “Connect using a broadband connection that is always on” and then click Next. 7. Final

Strany 35

Edimax AC-M3000/AC-M1000 User’s Manual 113.2 Software Configuration 3.2.1 Quick Configuration There are two ways to configure the system: using Conf

Strany 36

Edimax AC-M3000/AC-M1000 User’s Manual 128y TCP/IP Network Setup In the default configuration, Edimax AC-M3000 will assign an appropriate IP address

Strany 37

Edimax AC-M3000/AC-M1000 User’s Manual 129 1-2. Using DHCP: If want to use DHCP, please choose “Obtain an IP address automatically” and click OK. Th

Strany 38

Edimax AC-M3000/AC-M1000 User’s Manual 1307. Appendix C – IPSec VPN Edimax AC-M3000 has equipped with IPSec VPN feature starts from release version v

Strany 39

Edimax AC-M3000/AC-M1000 User’s Manual 131During the first-time login to Edimax AC-M3000, Internet Explorer will ask user to download the ActiveX com

Strany 40

Edimax AC-M3000/AC-M1000 User’s Manual 132 Suggestion: Please TURN OFF Internet Connection Firewall feature or upgrade the Windows OS into Windows

Strany 41

Edimax AC-M3000/AC-M1000 User’s Manual 133 Reasons may cause the Internet Explorer to stop the ActiveX unexpectedly as followings: a. The crash of

Strany 42

Edimax AC-M3000/AC-M1000 User’s Manual 134c. There are some cases of Windows messages by which Edimax AC-M3000 will hint current user to: (1) Close

Strany 43

Edimax AC-M3000/AC-M1000 User’s Manual 1358. Appendix D –Proxy Setting for Hotspot HotSpot is a place such as a coffee shop, hotel, or a public area

Strany 44

Edimax AC-M3000/AC-M1000 User’s Manual 136 3. Click the Proxy Server Properties from left menu and the homepage of the Proxy Server Properties will

Strany 45

Edimax AC-M3000/AC-M1000 User’s Manual 137 4. Add the ISP’s proxy Server IP and Port into External Proxy Server Setting.

Strany 46

Edimax AC-M3000/AC-M1000 User’s Manual 12 Edimax AC-M3000 supports three kinds of account interface. You can log in as admin, manager or operator. Th

Strany 47

Edimax AC-M3000/AC-M1000 User’s Manual 138 5. Enable Built-in Proxy Server in Internal Proxy Server Setting.

Strany 48

Edimax AC-M3000/AC-M1000 User’s Manual 139 6. Click Apply to save the settings.

Strany 49

Edimax AC-M3000/AC-M1000 User’s Manual 1409. Appendix E –Proxy Setting for Enterprise Enterprises usually isolate their intranet and internet by usin

Strany 50

Edimax AC-M3000/AC-M1000 User’s Manual 141 3. Click the Proxy Server Properties from left menu and the homepage of the Proxy Server Properties will a

Strany 51

Edimax AC-M3000/AC-M1000 User’s Manual 1424. Add your proxy Server IP and Port into External Proxy Server Setting. 5. Disable Built-in Proxy Serve

Strany 52

Edimax AC-M3000/AC-M1000 User’s Manual 143 6. Click Apply to save the settings. Warning:If your proxy server is disabled, it will make the user auth

Strany 53

Edimax AC-M3000/AC-M1000 User’s Manual 144 2. Open browser to add default gateway IP address (e.g. 192.168.1.254) and logout page IP address “1.1.1.

Strany 54

Edimax AC-M3000/AC-M1000 User’s Manual 145

Strany 55

Edimax AC-M3000/AC-M1000 User’s Manual 14610. Appendix F –Disclaimer for On-Demand Users In Edimax AC-M3000, the end user first gets a login page wh

Strany 56

Edimax AC-M3000/AC-M1000 User’s Manual 147 return unescape(pham.substring(offset, endstr)); // return cookie value section

Strany 57

Edimax AC-M3000/AC-M1000 User’s Manual 13 4. Then, click on Configuration Wizard and click the Run Wizard to start the wizard.

Strany 58 - 4.2.3 Policy Configuration

Edimax AC-M3000/AC-M1000 User’s Manual 148 var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].ind

Strany 59

Edimax AC-M3000/AC-M1000 User’s Manual 149 if(form.mypassword.value == "") { alert("Please enter password."); form.m

Strany 60

Edimax AC-M3000/AC-M1000 User’s Manual 150 disclaimer.style.display='none'; login.style.display=''; return true;

Strany 61

Edimax AC-M3000/AC-M1000 User’s Manual 151illegal activities; customize, measure, and improve our services and the site's content and layout; co

Strany 62

Edimax AC-M3000/AC-M1000 User’s Manual 152 </tr> <tr> <td height="40"><table width="170" height="

Strany 63

Edimax AC-M3000/AC-M1000 User’s Manual 153 </tr> <tr> <td colspan="2"> <div align="cen

Strany 64

Edimax AC-M3000/AC-M1000 User’s Manual 154<tr> <td width="100%"> <font color="#808080" size="2"><s

Strany 65

Edimax AC-M3000/AC-M1000 User’s Manual 15511. Appendix G—DHCP Relay AC-M3000 supports DHCP Relay defined according to RFC 3046 . For scaling reasons,

Strany 66

Edimax AC-M3000/AC-M1000 User’s Manual 156Here is an example of configuration file of the DHCP server: From the file, client that connects to AC-M

Strany 67

Edimax AC-M3000/AC-M1000 User’s Manual 145. Configuration Wizard A welcome page that briefly introduces the 6 steps will appear. Click Next to begin

Strany 68

Edimax AC-M3000/AC-M1000 User’s Manual 15y Step 3. Set System Information Home Page: Enter the URL to where the users should be directed when they a

Strany 69

Edimax AC-M3000/AC-M1000 User’s Manual 16¾ PPPoE Client: Set PPPoE Client’s Information Enter the “Username” and “Password” provided by the ISP. Cli

Strany 70

Edimax AC-M3000/AC-M1000 User’s Manual 17¾ POP3 User: POP3 Enter Domain Name/IP, Server Port of the POP3 server provided by the ISP, and then choose

Strany 71

The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. For more detailed information abou

Strany 72

Edimax AC-M3000/AC-M1000 User’s Manual 18¾ NT Domain User: NT Domain When NT Domain authentication method is selected, enter the Server IP Address,

Strany 73

Edimax AC-M3000/AC-M1000 User’s Manual 19Caution: During each step of the wizard, if you want to go back to modify the setting, please click the Back

Strany 74

Edimax AC-M3000/AC-M1000 User’s Manual 203. When an on-demand user logs in successfully, the following Login Successfully page will appear. There is

Strany 75

Edimax AC-M3000/AC-M1000 User’s Manual 214. Web Interface Configuration This chapter will guide you through further detailed settings. The following

Strany 76

Edimax AC-M3000/AC-M1000 User’s Manual 224.1 System Configuration This section includes the following functions: Configuration Wizard, System Informa

Strany 77

Edimax AC-M3000/AC-M1000 User’s Manual 23 4.1.2 System Information Most of the major system information about Edimax AC-M3000 can be set here. Plea

Strany 78

Edimax AC-M3000/AC-M1000 User’s Manual 24y System Name: Set the name of the system or use the default. y Device Name: FQDN (Fully-Qualified Domain

Strany 79

Edimax AC-M3000/AC-M1000 User’s Manual 25time into these fields. 4.1.3 WAN1 Configuration There are 4 connection types for the WAN1 Port: Static I

Strany 80

Edimax AC-M3000/AC-M1000 User’s Manual 26 y Static IP Address: Manually specifying the IP address of the WAN1 Port is applicable for the network en

Strany 81

Edimax AC-M3000/AC-M1000 User’s Manual 27 y PPTP Client: Point to Point Tunneling Protocol is a service that applies to broadband connection used m

Strany 82

Edimax AC-M3000/AC-M1000 User’s Manual iTable of Contents 1. Before You Start ...

Strany 83

Edimax AC-M3000/AC-M1000 User’s Manual 28 4.1.4 WAN2 & Failover Except selecting None to disable WAN2 port, there are 2 connection types for t

Strany 84

Edimax AC-M3000/AC-M1000 User’s Manual 29 y Static IP Address: Specify the IP Address, Subnet Mask and Default Gateway of WAN2 Port, which should be

Strany 85

Edimax AC-M3000/AC-M1000 User’s Manual 30 For Dynamic IP Address, WAN Failover and Fallback to WAN1 when possible functions also can be enabled like

Strany 86

Edimax AC-M3000/AC-M1000 User’s Manual 314.1.6 Controlled Configuration The clients of Controlled Port need authentication before they can access the

Strany 87

Edimax AC-M3000/AC-M1000 User’s Manual 32 DHCP Scope: Enter the “Start IP Address” and the “End IP Address”. Start IP Address means the fist IP addr

Strany 88

Edimax AC-M3000/AC-M1000 User’s Manual 33 Enable DHCP Relay: The DHCP Server IP address must be entered when this function is enabled. For more deta

Strany 89

Edimax AC-M3000/AC-M1000 User’s Manual 34 Operation Mode: Choose one of the two modes, NAT mode and Router mode, according to requirements. IP Addre

Strany 90

Edimax AC-M3000/AC-M1000 User’s Manual 35Preferred DNS Server: This means the primary DNS server for the DHCP of Uncontrolled Port. Alternate DNS Ser

Strany 91

Edimax AC-M3000/AC-M1000 User’s Manual 364.2 User Authentication This section includes the following functions: Authentication Configuration, Black L

Strany 92

Edimax AC-M3000/AC-M1000 User’s Manual 37 y Server 1~3: There are 5 kinds of authentication methods that Edimax AC-M3000 supports: Local User, POP3

Strany 93

Edimax AC-M3000/AC-M1000 User’s Manual ii4.3.4 Template Settings...

Strany 94

Edimax AC-M3000/AC-M1000 User’s Manual 38 y On-demand User: When the customers need to use wireless Internet service in stores, they have to get pri

Strany 95

Edimax AC-M3000/AC-M1000 User’s Manual 39Users List: Click to enter the On-demand Users List page. In the On-demand Users List, detailed information

Strany 96 - 4.3.3 Manual Configuration

Edimax AC-M3000/AC-M1000 User’s Manual 40 ¾ Status: Select to enable or disable this billing plan. ¾ Type: Set the billing plan by “Volume” (the ma

Strany 97 - 4.3.4 Template Settings

Edimax AC-M3000/AC-M1000 User’s Manual 41 Pressing the Create button for the desired plan, an on-demand user will be created, then click Printout t

Strany 98

Edimax AC-M3000/AC-M1000 User’s Manual 42Summary report page, the administrator can get a complete report or a report within a particular period. ¾

Strany 99

Edimax AC-M3000/AC-M1000 User’s Manual 434.2.1.1 Authentication Method – Local User Setting Choose Local User in the Authentication Method field, th

Strany 100 - 4.3.6 AP Upgrade

Edimax AC-M3000/AC-M1000 User’s Manual 44VPN Termination. Click Apply to save all the settings after finishing to add users. Upload User: Clic

Strany 101 - 4.4 Network Configuration

Edimax AC-M3000/AC-M1000 User’s Manual 45 The uploading file should be a text file and the format of each line is "ID, Password, MAC, Policy, R

Strany 102 - Edimax AC-M3000/AC-M1000

Edimax AC-M3000/AC-M1000 User’s Manual 46 Refresh: Click this to renew the Users List page. Search: Enter a keyword of a username that you want to

Strany 103

Edimax AC-M3000/AC-M1000 User’s Manual 47usernames matching the keyword will be listed. Del All: This will delete all users at once. Delete: This wi

Strany 104 - 4.4.2 Privilege List

Edimax AC-M3000/AC-M1000 User’s Manual 31. Before You Start 1.1 Preface This manual is for Hotspot owners, SMBs, or administrators in enterprises to

Strany 105 - 4.4.3 Monitor IP List

Edimax AC-M3000/AC-M1000 User’s Manual 48 Click the hyperlink of Radius Client List to enter the Radius Client Configuration page. Choose the desire

Strany 106 - 4.4.4 Walled Garden List

Edimax AC-M3000/AC-M1000 User’s Manual 49 When POP3, Radius, LDAP or NTDomain is selected from the drop-down memu, the function of Enable VPN Termin

Strany 107

Edimax AC-M3000/AC-M1000 User’s Manual 50 When POP3, Radius, LDAP or NTDomain is selected from the drop-down memu, the function of Enable VPN Termin

Strany 108

Edimax AC-M3000/AC-M1000 User’s Manual 51 y 802.1X Authentication: When enabling this function, the hyperlink of Radius Client List will appear. Cli

Strany 109 - 4.4.6 Dynamic DNS

Edimax AC-M3000/AC-M1000 User’s Manual 52 y Class Attribute: Class attribute sent from the RADIUS server. y Policy: Select the mapping policy of t

Strany 110

Edimax AC-M3000/AC-M1000 User’s Manual 53 y Server IP: Enter the IP address/domain name of the LDAP server. y Port: Enter the Port of the LDAP ser

Strany 111 - 4.5 Utilities

Edimax AC-M3000/AC-M1000 User’s Manual 54 y Server IP address: Enter the server IP address of the domain controller. y Transparent Login: If the f

Strany 112

Edimax AC-M3000/AC-M1000 User’s Manual 55 After entering the usernames in the Username field and the related information in the Remark field (not re

Strany 113

Edimax AC-M3000/AC-M1000 User’s Manual 56 If the administrator wants to remove a user from the black list, just select the user’s “Delete” check box

Strany 114 - 4.5.4 Restart

Edimax AC-M3000/AC-M1000 User’s Manual 57 y Firewall Profile Click the hyperlink of Setting for Firewall Profile, the Firewall Profile page will ap

Strany 115 - 4.6 Status

Edimax AC-M3000/AC-M1000 User’s Manual 42. System Overview 2.1 Introduction of Edimax AC-M3000 Edimax AC-M3000 is a Network Access Controller, specia

Strany 116

Edimax AC-M3000/AC-M1000 User’s Manual 58 Rule Item: This is the rule selected. Rule Name: The rule name can be changed here. The rule name can be s

Strany 117

Edimax AC-M3000/AC-M1000 User’s Manual 59 Specific Default Route Enable: Click to enable the setting of specific default route. Default Gateway: The

Strany 118

Edimax AC-M3000/AC-M1000 User’s Manual 60 y Total Bandwidth Select the bandwidth from the drop-down menu. It’s the total bandwidth the users under

Strany 119

Edimax AC-M3000/AC-M1000 User’s Manual 61particular policy, which cannot exceed the value for Total Bandwidth. y Individual Request Bandwidth Selec

Strany 120 - 4.6.4 Traffic History

Edimax AC-M3000/AC-M1000 User’s Manual 62Interim Update: The system will update the users’ current status and usage according to this time periodical

Strany 121

Edimax AC-M3000/AC-M1000 User’s Manual 63 c. Choose Uploaded Page and upload a login page. Click the Browse button to select the file to upload. Th

Strany 122

Edimax AC-M3000/AC-M1000 User’s Manual 64 After the upload process is completed, the new login page can be previewed by clicking Preview button at t

Strany 123 - 4.7 Help

Edimax AC-M3000/AC-M1000 User’s Manual 65 If the user-defined login page includes an image file, the image file path in the HTML code must be the im

Strany 124

Edimax AC-M3000/AC-M1000 User’s Manual 66 “Preview” can be clicked to see the uploaded page. If a user checks “I agree” and clicks Next, then he/

Strany 125

Edimax AC-M3000/AC-M1000 User’s Manual 67 d. Choose the External Page selection and get the login page from the specific website. Enter the website

Strany 126

Edimax AC-M3000/AC-M1000 User’s Manual 52.3 Specification 2.3.1 Hardware Specification y General Form Factor: Mini-desktop Dimensions (W x D x H): 2

Strany 127

Edimax AC-M3000/AC-M1000 User’s Manual 68 3. Logout Page: The administrator can apply customized logout page here. The process is similar to that o

Strany 128

Edimax AC-M3000/AC-M1000 User’s Manual 69 4. Login Success Page: The administrator can use the default login success page or get the customized log

Strany 129

Edimax AC-M3000/AC-M1000 User’s Manual 70 c. Choose Uploaded Page and you can get the login success page by uploading. Click the Browse button to se

Strany 130

Edimax AC-M3000/AC-M1000 User’s Manual 71 After the upload process is completed, the new login success page can be previewed by clicking Preview but

Strany 131

Edimax AC-M3000/AC-M1000 User’s Manual 72and click Delete to delete the file. d. Choose the External Page selection and you can get the login succe

Strany 132 - 7. Appendix C – IPSec VPN

Edimax AC-M3000/AC-M1000 User’s Manual 73 c. Choose Uploaded Page and you can get the Login Success Page Section for On-Demand Users. Click the Bro

Strany 133 - 2. Limitations

Edimax AC-M3000/AC-M1000 User’s Manual 74 After the upload process is completed, the new login success page for On-Demand can be previewed by clicki

Strany 134 - 4. ICMP and Active Mode FTP

Edimax AC-M3000/AC-M1000 User’s Manual 75and click Delete to delete the file. d. Choose the External Page selection and you can get the login succe

Strany 135

Edimax AC-M3000/AC-M1000 User’s Manual 76 c. Choose Uploaded Page and you can get the logout success page by uploading. Click the Browse button to

Strany 136

Edimax AC-M3000/AC-M1000 User’s Manual 77 After the upload process is completed, the new logout success page can be previewed by clicking Preview bu

Strany 137

Edimax AC-M3000/AC-M1000 User’s Manual 6Supports DoS attack protection Supports user Black List Allows user identity plus MAC address authentication

Strany 138

Edimax AC-M3000/AC-M1000 User’s Manual 78 After the image file is uploaded, the file name will show on the “Existing Image Files” field. Check the fi

Strany 139

Edimax AC-M3000/AC-M1000 User’s Manual 79 y Enhance User Authentication: With this function enabled, only the users with their MAC addresses in th

Strany 140

Edimax AC-M3000/AC-M1000 User’s Manual 804.3 AP Management This section includes the following functions: AP List, AP Discovery, Manual Configuration

Strany 141

Edimax AC-M3000/AC-M1000 User’s Manual 81 After adding an AP: Check any AP and click the button below to Reboot, Enable, Disable and Delete the

Strany 142 -  Gateway setting

Edimax AC-M3000/AC-M1000 User’s Manual 82 y AP Name Click AP Name and enter the interface about related settings. There four kinds of settings, Ge

Strany 143

Edimax AC-M3000/AC-M1000 User’s Manual 83Password and Remark here if desired. Firmware information can also be viewed here. ¾ LAN Setting: Clic

Strany 144

Edimax AC-M3000/AC-M1000 User’s Manual 84 Properties y SSID: The SSID is the unique name shared among all devices in a wireless network. The SSID m

Strany 145 -  Client setting

Edimax AC-M3000/AC-M1000 User’s Manual 85y CTS Protection: The default value is Disable. When select “Enable”, a protection mechanism will decrease

Strany 146

Edimax AC-M3000/AC-M1000 User’s Manual 86 y WPA: WPA is Wi-Fi’s encryption method that protects unauthorized network access by verifying network us

Strany 147

Edimax AC-M3000/AC-M1000 User’s Manual 87 y WPA Mixed: If using TKIP and AES encryption type at the same time is desired, choose this security type

Strany 148

Edimax AC-M3000/AC-M1000 User’s Manual 7Built-in billing profiles for on-demand accounts Enables session expiration control for on-demand accounts by

Strany 149

Edimax AC-M3000/AC-M1000 User’s Manual 88 y Status After clicking the hyperlink of Status, the basic information of the AP including AP Name, AP Ty

Strany 150

Edimax AC-M3000/AC-M1000 User’s Manual 89 ¾ System Status: The table shows the information about AP Name, AP Status and Last Reporting Time. ¾

Strany 151

Edimax AC-M3000/AC-M1000 User’s Manual 90 ¾ Wireless LAN Status: The table shows all of the related wireless information. ¾ Access Control Status

Strany 152

Edimax AC-M3000/AC-M1000 User’s Manual 91 4.3.2 AP Discovery Use this function to detect and manage all the supported APs in the network segment

Strany 153

Edimax AC-M3000/AC-M1000 User’s Manual 92for APs and then click Discover again. For the desired AP, input the desired name and password, select one t

Strany 154

Edimax AC-M3000/AC-M1000 User’s Manual 93 Click Configuring to go to the related configuration. For the details, please refer to 4.3.1 AP List. y

Strany 155

Edimax AC-M3000/AC-M1000 User’s Manual 94 The Interface and AP Access configuration is the same as the settings mentioned above. Click “Configure”

Strany 156

Edimax AC-M3000/AC-M1000 User’s Manual 95 4.3.4 Template Settings Template is a model that can be copied to every AP without having to configure t

Strany 157 - 11. Appendix G—DHCP Relay

Edimax AC-M3000/AC-M1000 User’s Manual 96 After click the hyperlink of Template ID to enter the Template Edit page, revise the configuration for dem

Strany 158

Edimax AC-M3000/AC-M1000 User’s Manual 97 4.3.5 Firmware Management In this function, AP’s firmware can be uploaded. The current firmware can als

Komentáře k této Příručce

Žádné komentáře